Advanced Search
Displaying assets from 1 to 30 out of 8495
-
Description XRD patterns of FG and CG samples in the annealed condition (N = 0) and after five turns of HPT processing (N = 5). a) FG samples and b) CG samples of V10Cr15Mn5Fe35Co10Ni25 HEA.
Article Title: Effect of Initial Grain Size on Deformation Mechanism during High‐Pressure Torsion in V10Cr15Mn5Fe35Co10Ni25 High‐Entropy Alloy
Publication Title: Advanced Engineering Materials -
Description A: Strain–stress‐curves, B: flexural moduli with respect to the height of the samples, C: boxplots of the distributions of sample averages, blue: human temporal bone (TB), green: transparent epoxy...
Article Title: A Comparison of Processing Properties of Anatomic Facsimile Models (AFM) of the Temporal Bone with Original Human Bone Structures
Publication Title: Advanced Engineering Materials -
Description Ablation characteristics of the target material at different laser fluence: a) 26.53, b) 30.0, c) 33.16, d) 35.81, e) 39.79, f) 43.10, and g) 46.42 J cm−2. h) Width of evaporated area measured by...
Article Title: Nanosecond Pulsed Laser Ablation on Stainless Steel − Combining Finite Element Modeling and Experimental Work
Publication Title: Advanced Engineering Materials -
Description a) Hardness distributions from the surfaces to the cores of the samples; b) Engineering stress–strain curves of the samples.
Article Title: Mechanical Properties and Microstructures of Commercial‐Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling
Publication Title: Advanced Engineering Materials -
Description Illustration of the quadtree element data structure. The first frame shows an selement and four child elements. Splitting of one of the children and one of its children is shown, along with the...
Article Title: Phase‐Field Modeling of Microstructural Evolution by Freeze‐Casting
Publication Title: Advanced Engineering Materials -
Description SEM micrographs of treated 301 SS samples using 2 mm Ø 304 SS balls, SMATed for (a) 5 min, (b) 10 min, (c) 15 min, (d) 20 min, with the formation of mechanical twins.
Article Title: Enhanced Passivation Layer by Cr Diffusion of 301 Stainless Steel Facilitated by SMAT
Publication Title: Advanced Engineering Materials -
Description Joining interfaces between AA6061‐T6 and PP along the vertical direction: a) SEM image and b) EDX result.
Article Title: An Effective Friction Spot Joining Method for Plastic and Aluminum Alloy
Publication Title: Advanced Engineering Materials -
Description RBM DIC measurement setup: a) specimen with evaluation points P1 to P3, absolute error (b) and (d) and relative error (c) and (e) for 2D DIC (top) and 3D DIC (bottom) for three different...
Article Title: Improving DIC Accuracy in Experimental Setups
Publication Title: Advanced Engineering Materials -
Description Foaming behavior of H44 preceramic polymer with titania and/or glass powder additions.
Article Title: Novel‐Type Inorganic Foams from Preceramic Polymers with Embedded Titania Nanoparticles for Photo‐Catalytic Applications
Publication Title: Advanced Engineering Materials -
Description (a) Plot of strain hardening rate θ with true strain, and (b) True stress–true strain curve of as‐extruded alloys ZM31 + 0.3Y, ZM31 + 3.2Y, and ZM31 + 6Y during ED compression.
Article Title: A Critical Review of Mg–Zn–Y Series Alloys Containing I, W, and LPSO Phases
Publication Title: Advanced Engineering Materials -
Description Fluctuating energy density at the surface according the position of the focal point.
Article Title: Contribution to the Laser Welding of Wrought and Spray‐Compacted Aluminum Alloys and the Impact of the Alloy Composition on the Welding Microstructure
Publication Title: Advanced Engineering Materials -
Description Summary of the high‐strain rate tensile results for AZ31.
Article Title: Characterization of High‐Strain Rate Mechanical Behavior of AZ31 Magnesium Alloy Using 3D Digital Image Correlation
Publication Title: Advanced Engineering Materials -
Description EIS data fitting of the second type: a) the schematic theoretical Nyquist plots; MF = medium frequency range. b) Equivalent circuit model; c) physical model.
Article Title: The Inhibitive Effect of Artificial Seawater on Magnesium Corrosion
Publication Title: Advanced Engineering Materials -
Description Mercury intrusion porosimetry data for three different fibre architectures.
Article Title: Hybrid Filtration Membranes incorporating Nanoporous Silica within a Nanoscale Alumina Fibre Scaffold
Publication Title: Advanced Engineering Materials -
Description Photographs of static water contact angle measurement and XPS spectra of nAl@NC/GAP and raw nAl.
Article Title: Tailoring Structural Energetics for Enhanced Reactivity of Nano‐Aluminum Particles Based Microspheres
Publication Title: Advanced Engineering Materials -
Description Schematic of coating options against corrosion – single protective layer, double protective layer, and double protective layer with a saw‐tooth structure.
Article Title: Formation of Corrosion‐Resistant Thermal Diffusion Boride Coatings
Publication Title: Advanced Engineering Materials -
Description Longitudinal section of a billet after ECAP: Fe sheath 30 mm in diameter × 50 mm length and NiTi core 3 mm in diameter × 40 mm in length. The white arrow and white line show the point and path for...
Article Title: Evaluating a New Core‐Sheath Procedure for Processing Hard Metals by Equal‐Channel Angular Pressing
Publication Title: Advanced Engineering Materials -
Description Theoretical calculation of Poisson's ratio, Hertzian contact pressure, maximum surface temperature, hysteresis area, and dissipation energy of TaC‐based composites
Article Title: Role of Interfaces on Multi‐length Scale Wear Mechanics of TaC‐based Composites
Publication Title: Advanced Engineering Materials -
Description Osteogenic differentiation and inflammatory response. hMSCs were seeded on SF, SF‐50% HA, and SF‐50% CaS scaffolds at a density of 5 × 104 cells per scaffold and cultured in osteogenic...
Article Title: Silk Fibroin 3D Microparticle Scaffolds with Bioactive Ceramics: Chemical, Mechanical, and Osteoregenerative Characteristics
Publication Title: Advanced Engineering Materials -
Description Two examples of dilatograms of micro and macro samples for a heating rate of 30 and 90 K min−1 left. Detail of slope changes during heating for micro and macro for 30 K min−1 heating rate on the...
Article Title: Dilatometric and Calorimetric Short‐Term Characterization Methods on 100Cr6 Micro Samples for High‐Throughput Investigations
Publication Title: Advanced Engineering Materials -
Description Curved layer, monolithic body armor panel, immediately after LOM processing. The piece has been fully decubed and placed back on the LOM paper mandrel for illustration. Notice the smooth surface...
Article Title: Additive Manufacturing of Ceramic‐Based Materials
Publication Title: Advanced Engineering Materials -
Description a) Partial Al−2Mg–Zn phase diagram and chemical compositions of the examined alloys and b) directional solidification setup, samples, and specimens.
Article Title: Dendritic Spacing/Columnar Grain Diameter of Al–2Mg–Zn Alloys Affecting Hardness, Tensile Properties, and Dry Sliding Wear in the As‐Cast/Heat‐Treated Conditions
Publication Title: Advanced Engineering Materials -
Description SEM image of Al powder. Inset depicts the corresponding statistical diameter distribution histograms of Al powder.
Article Title: A Cost‐Efficient Fabrication Strategy for Conductive Ti2AlC Honeycomb Monolith Using Elemental Powders
Publication Title: Advanced Engineering Materials -
Description Photograph of the large area flexible PSCs (a) and their J–V curve with an active area of 1 cm2 on different substrates (b). Solid lines in the J–V curve shows a forward scan from JSC to VOC and...
Article Title: Dependence of ITO‐Coated Flexible Substrates in the Performance and Bending Durability of Perovskite Solar Cells
Publication Title: Advanced Engineering Materials -
Description Electrical output characterization of PEG of the hybrid energy harvester at varying rotational speed, showing the a) open‐circuit voltage and b) short‐circuit current.
Article Title: An Integrated Triboelectric–Electromagnetic–Piezoelectric Hybrid Energy Harvester Induced by a Multifunction Magnet for Rotational Motion
Publication Title: Advanced Engineering Materials -
Description a) Surface maps of the as‐built sample and b) the surface finished ones after plastic media blasting, c) ceramic sand blasting, and d) laser shock processing.
Article Title: Effect of Three Different Finishing Processes on the Surface Morphology and Fatigue Life of A357.0 Parts Produced by Laser‐Based Powder Bed Fusion
Publication Title: Advanced Engineering Materials -
Description Hardness variation of SiC thin film deposited at 500 °C with a substrate bias of −40 V as a function of the nanoindenter indentation depth.
Article Title: Nanocolumnar Composite Microstructure of Superhard SiC Thin Film Deposited Using Unbalanced Magnetron Sputtering Method
Publication Title: Advanced Engineering Materials -
Description Mechanical performance of the cuttlebone‐inspired structure and three additional structures. A) Structure of the four models, and B) corresponding deformation and stress distribution under...
Article Title: Thermomechanical Analysis of a Bio‐Inspired Lightweight Multifunctional Structure
Publication Title: Advanced Engineering Materials -
Description Scheme of test set‐up of B3B with punch (a), upper sealing (b), lower sealing (c), guideway (d), loading ball (e), specimen centring ring (f), supporting ball centring ring (g), supporting ball...
Article Title: Influence of the Specimen Manufacturing Process on the Strength of Carbon‐Bonded Alumina (Al2O3–C)
Publication Title: Advanced Engineering Materials -
Description The compressive strengths of Zn and Zn–7Al–Zr alloys before and after immersion in SBF solution.
Article Title: Refined Lamellar Eutectic in Biomedical Zn–Al–Zr Alloys for Mechanical Reinforcement
Publication Title: Advanced Engineering Materials