Advanced Search
Displaying assets from 1 to 30 out of 2215
-
Description 1H‐NMR spectra of Br‐PEG‐Br and PBA14‐PEG‐PBA14.
Article Title: Toughening Mechanism of Hydrophobic Association Hydrogels Reinforced by Latex Particles
Publication Title: Macromolecular Materials and Engineering -
Description The stress–strain curves of PET, PTG, and PTGC NFs scaffolds.
Article Title: Studying the Potential Application of Electrospun Polyethylene Terephthalate/Graphene Oxide Nanofibers as Electroconductive Cardiac Patch
Publication Title: Macromolecular Materials and Engineering -
Description Morphologies of the inkjet printed gel lens a1) at rest and b1) under the applied voltage of 4 kV, and measurement of curvature radius of the gel lens a2) at rest and b2) under the applied voltage.
Article Title: Self‐Contained Focus‐Tunable Lenses Based on Transparent and Conductive Gels
Publication Title: Macromolecular Materials and Engineering -
Description Sonogashira–Hagihara coupling polymerization of 1o, 1m, and 1p with 2 and 3.
Article Title: Synthesis, Chiroptical, and Redox Properties of Ferrocene‐Containing Optically Active Polymers
Publication Title: Macromolecular Materials and Engineering -
Description Fluorescence spectra (excitation at 380 nm) for PFV‐(F‐BODIPY)2 in THF at 25 °C (conc. 1.0 × 10−6 m).
Article Title: Well‐Defined End‐Functionalized Conjugated Polymers/Oligomers Exhibiting Unique Emission Properties through the End Groups: The Exclusive Synthesis by Combined Olefin Metathesis with Wittig‐type Coupling
Publication Title: Macromolecular Materials and Engineering -
Description Stress–strain curves of drawn fiber with 30 wt% UHMW‐PE prepared at 130 °C and UHMW‐PE fiber prepared by melt‐spinning and melt‐drawing.[17]
Article Title: High‐Strength and High‐Toughness Melt‐Spun Polyethylene Fibers Derived from Composite Structure Formation
Publication Title: Macromolecular Materials and Engineering -
Description FTIR spectra of GO and f‐GO.
Article Title: Functionalized Graphene Oxide Based on Hydrogen‐Bonding Interaction in Water: Preparation and Flame‐Retardation on Epoxy Resin
Publication Title: Macromolecular Materials and Engineering -
Description An example of failure mode analysis with UV light image (experiment #1, Table ).
Article Title: Reversible Bonding of Aromatic Thermosetting Copolyesters for In‐Space Assembly
Publication Title: Macromolecular Materials and Engineering -
Description Typical images of cell (HeLa) adhering on glass wafers modified by PSt, P(St‐r1/1‐GMA), P(St‐r1/3‐GMA), P(St‐r1/5‐GMA), PGMA, PMOXA/PSt, PMOXA/P(St‐r1/1‐GMA), PMOXA/P(St‐r1/3‐GMA),...
Article Title: A New Strategy to Prepare Poly(2‐methyl‐2‐oxazoline)‐Based Antifouling Coatings: Using UV‐Crosslinked Copolymer Anchors
Publication Title: Macromolecular Materials and Engineering -
Description FE‐SEM images of drawn fibers after etching with fuming nitric acid.
Article Title: High‐Strength and High‐Toughness Melt‐Spun Polyethylene Fibers Derived from Composite Structure Formation
Publication Title: Macromolecular Materials and Engineering -
Description Storage modulus of bimodal IPNs, F4D2000‐PPO3BMI/ D400‐DGEBA, as a function of temperature. 1: IPN11 (synthesis regime 1 d/90 °C), 2: IPN11 (3 h/100 °C, 2 d/90 °C), 3: IPN21 (8 h/100 °C, 3 d/90 °C).
Article Title: Self‐Healing Epoxy and Reversible Diels‐Alder Based Interpenetrating Networks
Publication Title: Macromolecular Materials and Engineering -
Description A) Reaction between Ceramer 1608 and Jeffamine T‐403 oligomers; B) Reaction between Ceramer 1608 and Sorbitol.
Article Title: Application of Machine Learning Tools for the Improvement of Reactive Extrusion Simulation
Publication Title: Macromolecular Materials and Engineering -
Description Morphology and diameter distribution of electrospun nanofibers from 12 wt% PVA/PEI solutions with different PVA/PEI mass ratios: a) 100:0, b) 85:15, c) 75:25, d) 65:35, and e) 50:50.
Article Title: Reversible Photochromic Nanofiber Membrane Containing Comb‐Like Poly(octadecyl acrylate) Nanoparticles Used for Ultraviolet Intensity Indicator
Publication Title: Macromolecular Materials and Engineering -
Description Results from the mechanical tests as a function of scaffold porosity: a) Young Modulus; b) yield stress.
Article Title: Micromechanical Behavior of TPMS Scaffolds for Bone Tissue Engineering
Publication Title: Macromolecular Materials and Engineering -
Description Schematic representation of microbubble fabrication with T‐junction microfluidics. Two phases meet at the T‐junction and microbubble formation is established (1). Gelatin microbubbles are collected...
Article Title: Biofabrication of Gelatin Tissue Scaffolds with Uniform Pore Size via Microbubble Assembly
Publication Title: Macromolecular Materials and Engineering -
Description Key parameters for the non‐isothermal crystallization kinetics of materials
Article Title: Injection Molded Strong Polypropylene Composite Foam Reinforced with Rubber and Talc
Publication Title: Macromolecular Materials and Engineering -
Description Fabrication method for gel microspheres involving spraying HA solution on micro‐roughened surface. A) Schematic illustration of fabrication of gel microspheres and chemical structure of glycidyl...
Article Title: Preparation of Hyaluronic‐Acid‐Based Microspherical Particles with Tunable Morphology Using a Spray Method on a Superhydrophobic Surface
Publication Title: Macromolecular Materials and Engineering -
Description Responses of sandwich‐structured strain sensors to cyclic motions with different finger bending and recovering.
Article Title: Flexible Sandwich Structural Strain Sensor Based on Silver Nanowires Decorated with Self‐Healing Substrate
Publication Title: Macromolecular Materials and Engineering -
Description Atomic composition analyzed by energy‐dispersive X‐ray spectroscopy (EDX) of the surface of the microspheres made of PDLA and the respective chitosan‐g‐oligolactide copolymers in a 70/30 wt%
Article Title: Chitosan‐g‐Polyester Microspheres: Effect of Length and Composition of Grafted Chains
Publication Title: Macromolecular Materials and Engineering -
Description Meshes‐to‐Fibrils Transition of Gellan Gum Hydrogel Architecture by Thermal Annealing - Macromolecular Materials and EngineeringMacromol. Mater. Eng. vol. 305, December 2020
Article Title: Meshes‐to‐Fibrils Transition of Gellan Gum Hydrogel Architecture by Thermal Annealing
Publication Title: Macromolecular Materials and Engineering -
Description The fabrication and structural characterization of the nacre‐inspired GO/SA nanocomposite paper. a) Molecular ball‐and‐stick models of GO nanosheet and SA molecule. b) Scheme for fine aqueous of GO...
Article Title: Directed Assembly of Large‐Sized, Mechanically Robust, Nacre‐Inspired Graphene Oxide/Sodium Alginate Nanocomposite Paper
Publication Title: Macromolecular Materials and Engineering -
Description Orthogonal experimental analysis
Article Title: Reversible Bonding of Aromatic Thermosetting Copolyesters for In‐Space Assembly
Publication Title: Macromolecular Materials and Engineering -
Description Cohesion strength and interfacial adhesion of mussel‐inspired adhesives formed in different environments. a) Schematic representation of failure of adhesives caused by poor interfacial adhesion and...
Article Title: Environment‐Dependent Adhesive Behaviors of Mussel‐Inspired Coordinate‐Crosslinked Bioadhesives
Publication Title: Macromolecular Materials and Engineering -
Description Fiber diameter, pore diameter, and porosity of different scaffolds
Article Title: Controllable Aligned Nanofiber Hybrid Yarns with Enhanced Bioproperties for Tissue Engineering
Publication Title: Macromolecular Materials and Engineering -
Description Responsive electrical devices. A) Fabricated fixture for the temperature sensor (top) with the tailored self‐bending unit inserted in the slot to form the disconnected (middle) and connected...
Article Title: Mechanical Assembly of Thermo‐Responsive Polymer‐Based Untethered Shape‐Morphing Structures
Publication Title: Macromolecular Materials and Engineering -
Description TEM‐micrographs taken from ultrathin sections of HDPE films containing a) 15 and b) 32 wt% silica. Micrograph c) is a magnified image of the region denoted by the rectangle in micrograph b); the...
Article Title: Polyethylene–Silica Nanocomposites with the Structure of Semi‐Interpenetrating Networks
Publication Title: Macromolecular Materials and Engineering -
Description Rheological characterization of injectable self‐healing PC10A hydrogel and PC10A‐QD hydrogel. A) Strain‐dependent (ω = 6.28 rad s−1) and (B) frequency‐dependent (strain = 1%) oscillatory shear...
Article Title: An Injectable Self‐Healing Multifluorescent Hydrogel Formed by Engineered Coiled‐Coil Polypeptide and Quantum Dots
Publication Title: Macromolecular Materials and Engineering -
Description TGA curves of PR6 (unfinished ACC based on 6 wt% cellulose in the matrix‐forming dope, continuous line) und PR6A (finished ACC based on 6 wt% cellulose in the matrix‐forming dope, dashed line).
Article Title: Preparation of C/C‐SiC Composites from All‐Cellulose Precursors
Publication Title: Macromolecular Materials and Engineering -
Description Separation measure
Article Title: Physico‐Mechanical and Antibacterial Properties of Pine Gum/Epoxy Composites with/without Silver Nanoparticles
Publication Title: Macromolecular Materials and Engineering -
Description Residual mass as a function of hydrolysis time of neat PLA and PLA/PTT/PEGMA (70/30/1) blends produced by one‐step and two‐step blending.
Article Title: Effect of Blending Procedure on Tensile and Degradation Properties of Toughened Biodegradable Poly(lactic acid) Blend with Poly(trimethylene terephthalate) and Reactive Compatibilizer
Publication Title: Macromolecular Materials and Engineering